ABS Front Lip Spoiler for Tesla Model Y Juniper 2025+ | Aerodynamic Front Bumper Lip Splitter | 3-Piece Design | Matte & Carbon Texture Options | No-Drill 3M Installation

🏎️ ABS Front Lip Spoiler for Tesla Model Y Juniper (2025+)

Upgrade the front profile of your Tesla Model Y Juniper (2025 and newer) with this precision-molded ABS front lip spoiler, engineered specifically for the refreshed Juniper front bumper. Designed to enhance visual aggression while maintaining daily usability, this front lip delivers a clean OEM-style fit with subtle aerodynamic benefits—without drilling or permanent modification.

Whether you're building a sportier street look or adding protection to the lower bumper edge, this front lip spoiler strikes the perfect balance between style, function, and value.

🔧 Why Choose This Front Lip Spoiler for Model Y Juniper?

✔ Juniper-Specific Fitment

Precisely molded to match the 2025+ Model Y Juniper facelift bumper, ensuring correct curvature, alignment, and edge contact.

✔ Enhanced Aerodynamic Profile

Helps guide airflow under the front bumper, contributing to improved high-speed stability and reduced turbulence compared to an unprotected lower edge.

✔ Sporty & Aggressive Styling

Visually lowers the front stance and adds a performance-inspired appearance without looking overstyled or aftermarket-heavy.

✔ Durable ABS Construction

Made from high-quality automotive-grade ABS plastic—lightweight, impact-resistant, and UV-stable for long-term exterior use.

✔ No-Drill Installation

Installs using pre-applied 3M automotive adhesive tape. No drilling, no cutting, and no damage to factory components.

✔ OEM-Style 3-Piece Design

Three-piece configuration allows for better contour matching and easier installation on complex bumper curves.

🎨 Available Finish Options

Choose the finish that best complements your Model Y Juniper’s exterior:

• Matte Black – Subtle, stealthy finish with low glare

• Glossy Black – High-gloss OEM-style look that matches Tesla trim

• Matte Carbon Texture – Carbon-fiber appearance with understated elegance

• Glossy Carbon Texture – Sporty carbon pattern with a premium shine

Note: Carbon texture finishes are ABS with carbon-style surface texture, not real carbon fiber.

📐 Product Specifications

🚘 Benefits of Installing a Front Lip Spoiler

A front lip spoiler is not just a cosmetic upgrade—it offers practical advantages for daily driving:

• ✔ Improves front-end airflow management

• ✔ Enhances visual stance and sporty character

• ✔ Helps protect the lower bumper from curb rash and road debris

• ✔ Maintains OEM look while adding performance styling

• ✔ Non-invasive upgrade that preserves resale value

🛠️ Installation Guide (Adhesive Mount)

1. Surface Preparation
   Clean the front bumper thoroughly with isopropyl alcohol. Remove wax, dirt, and grease. Dry completely.

2. Check Temperature
   Recommended installation temperature: 15–30°C (59–86°F).

3. Test Fit First
   Align all three pieces on the bumper without removing the adhesive backing.

4. Activate Adhesive
   Gently heat the 3M tape using a hair dryer for 30–60 seconds (do not exceed 40°C / 104°F).

5. Install Center Piece
   Remove backing, align carefully, and press firmly for 30 seconds.

6. Install Side Pieces
   Repeat for left and right sections, ensuring flush contact along edges.

7. Secure & Cure
   Use painter’s tape to hold pieces in place for 24 hours.
   Avoid washing or high-speed driving for 48–72 hours.

🧼 Care & Maintenance

• Clean with pH-neutral car shampoo and microfiber cloth

• Avoid directing high-pressure water at the edges

• Safe for car washes after 7 days of curing

• UV-resistant material resists fading and yellowing

• Optional ceramic coating for enhanced protection and gloss

🔗 Complete the Look

Pair this Model Y Juniper front lip spoiler with matching rear spoilers or side skirts to create a cohesive, performance-inspired exterior upgrade.